1. It is possible to feed foil in
longitudinal and transversal directions with the machine. Three
longitudinal feeding shafts and two transversal feeding shafts
could satisfy your requirements of line stamping,wide foil
stamping and big area stamping. It is possible to have six foil
feeding shafts in longitudinal direction.
2. Whole machine is designed and produced in accordance with
European EC standards to outstand its safety. New designed foil
stamping control system,short and long foil advancing distance
synchronized with movement of main unit make foil-stamping
effect enhanced greatly. Patented photoelectric detectors make
holographic stamping and surface-silver stamping more accurate.
3. Sliding foil unwinding holder and foil leading device ease
foil changover. There are foil use-up reminding function and
auto foil broken detecting alarm and auto machine stop because
of it.
4. Famous brand control system monitors running of whole
machine.Big LCD as interface to monitor machine-running
condition and indicate and diagnose machine troubles.
5. Each heating zone could be controlled independently. Desired
temperature coulde be set to each heating zone through LCD
screen. Your set and current temperature of each heating zone
could be indicated in LCD screen.Timing heating function with
the machine could enhance working dfficiency greatly.
Technology Parameter:
Max.sheet size: 920X650mm
Min.sheet size: 520X440 mm
Processible material
Paper ≥ 90 g/m2
Cardboard: ≤1.5 mm
Corrugated board B/E flute thickness ≤4
Gripper margin range: 2-14 mm
Waste strip gripper side: ≥10mm
Max.die cutting area: 920X640 mm
Max.inside chase size: 940x660mm
Max.working pressure: 200 tons
Max.die cutting speed: 6000s/h
Max.stamping area : 900X600 mm
Max.stamping speed: 6000 s/h
Max.hologram stamping speed: 5000 s/h (optional)
Numbers of longitudinal foil feeding shafts: 3( standard); 6(
optional)
Numbers of transversal foil feeding shafts: 2
Total machine net weight 12500 kg
Max.advancing distance Longitudinal :600 mm
Transversal: 900mm
Min.advancing distance in longitudinal and transversal: 0.1mm
Max.foil diameter (longitudinal) 210 mm
Diameter of foil core (mm/inch): 25.4/1”, 76.2/3”
Min.foil width: 25 mm
Heating capacity: 15.8 kw
Numbers of heating zones: 10
Main motor capacity 11kw
Max.feeding pile height: 1250 mm
Max.delivery pile height : 1350mm
Overall machine dimension (LxWxH) 4600X4560X2250 mm
Power supply: 3 phases 380V/50 Hz with ±10% tolerance
Rated current: 50A
Rated Power: 40KW
